Site icon Unichem Steel and Alloys Pvt. Ltd.

Incoloy 825 Pipe Fittings

ASTM A420 LTCS WPL6 Pipe Fittings: Unichem Steel & Alloy Pvt. Ltd. is a known stockist and manufacturer of ASTM A420 unichemsteel.com

Incoloy 825 Buttweld Fittings Supplier. ASTM B366 Incoloy 825 Pipe Fittings Manufacturer in India

Incoloy 825 Buttweld Fittings Supplier, Manufacturer

Unichem Steel & Alloy Pvt. Ltd. is ISO certified 825 Incoloy Pipe Cap manufacturers in India. We are stocking distributor of Incoloy WERKSTOFF NR. 2.4858 Cross, UNS N08825 Buttweld Fittings, Incoloy 825 Reducer & DIN 2.4858 Buttweld Fittings at very low price due to reasonable man hours in India and good source of high quality Incoloy 825 Pipe Bend at stock available in Mumbai, India. Incoloy 825 Buttweld Fittings is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. 825 Incoloy Alloy End Cap is similar to alloy 800 but has improved resistance to aqueous corrosion. Maintaining safety stock of Incoloy Alloy 825 Pipe Fittings. We provide a complete range of Incoloy 825 180 Deg Bend, Incoloy 825 Concentric / Eccentric Reducer in Stock in various sizes. We have our stocking distributors in Delhi, Hyderabad, Surat (Gujarat), Chennai, Bangalore, Pune (Maharashtra) & Tamil Nadu. Check once our Incoloy Grade 825 Butt weld Pipe Fittings price before buying Incoloy Alloy DIN 2.4858 Butt Weld Fittings from India or China. Incoloy UNS N08825 Seamless Pipe Fittings offers exceptional resistance to corrosion by sulphuric and phosphoric acids and is often the most cost effective alloy in sulphuric acid service. ANSI B16.9 Incoloy 825 Welded Buttweld Fittings, ASTM B366 825 Incoloy 90 degree Elbow is a nickel-iron-chromium alloy with small amounts of molybdenum, copper, and titanium.

Stockist of Incoloy 825 Mitered Pipe Bends, Incoloy 825 45 Degree Elbow, 90 Degree Elbow, Incoloy UNS N08825 Seamless Pipe Fittings, Incoloy 825 Buttweld Pipe Fittings, ASTM B366 825 Incoloy Eccentric Reducer, Alloy 825 Concentric Reducer, Incoloy WERKSTOFF NR. 2.4858 Lateral Tee, 825 Incoloy Equal Tee, Long Stub End, Short Stub End, Incoloy 825 End Cap, Pipe Bend, Equal Cross in Mumbai

Exporter of NiCr21Mo Incoloy® Alloy Buttweld Elbow, NA 16 Incoloy Long Stub End, JIS NCF 825 Buttweld Elbow, Incoloy Alloy WPNC1 Equal Tee Supplier in South Africa, Saudi Arabia, Kuwait, Singapore, Malaysia, UAE, Italy, Nigeria, Iraq, Vietnam, Oman, Qatar, Myanmar, Sri Lanka.

Nickel Alloy 825 Seamless Pipe Fittings Specifications

Specifications

ASTM B366 / ASME SB366.

Standards / Dimensions

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43.

Size

Seamless Fittings: 1/2″ – 10″, Welded Fittings: 1/2″ – 48″.

Type

Seamless / Welded / Fabricated.

Thickness

20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.

Schedule

Sch 5 TO Sch XXS.

Stocking Distributors of Different Types of Incoloy 825 Buttweld Fittings (UNS N08825 / BS NA 16 / EN NiCr21Mo / WERKSTOFF NR. 2.4858 / GOST ЭП703 / JIS NCF 825 / AFNOR NFE30C20DUM / OR XH38BT) in the form of 45 Degree Elbow | 90 Degree Elbow | Long Radius Ebow (LR Ebow) | Short Radius Elbow (SR Elbow) | Equal Tee | Lateral Tee | Concentric Reducer | Eccentric Reducer | Equal Cross | Unequal/Reducing Cross | Long Stub End | Short Stub End | Lap Joint Stub End | End Caps | Seamless Fittings | Welded Fittings | 10D Pipe Bend | Long Radius Pipe Bend | Hot Induction Pipe Bend | J Pipe Bend | Mitered Pipe Bend | Piggable Pipe Bend | U Pipe Bend at Best Prices in India.

Incoloy 825 Pipe Fittings, Incoloy 825 Mitered Pipe Bends is especially resistant to sulfuric and phosphoric acids. Unichem Steel & Alloy Pvt. Ltd. is supplying Incoloy 825 Pipe Fittings to Kuwait, Oman, UK, USA, Israel, Egypt, Russia, Canada, Germany, France, Qatar, Australia, Iran, Turkey, UAE, Italy, Thailand, Indonesia, Malaysia, Bahrain, Singapore, Sri Lanka, Sweden & Saudi Arabia. Incoloy 825® Alloy Pipe bend is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium (NiCr21Mo), supplied in the hot worked and annealed condition.

Various Incoloy 825 Buttweld Fittings Types

ANSI B16.9 Incoloy 825 Buttweld Elbow, 2.4816 Buttweld 90 Degree Elbow, N08825 Buttweld 45 Degree Elbow Supplier, JIS NCF 825 Buttweld Elbow, ASTM B366 Alloy 825 Buttweld Elbow Manufacturer in Mumbai India

Incoloy 825 Degree Elbow

ANSI B16.9 Incoloy 825 Buttweld Tee, N08825 Buttweld Unequal Tees Supplier, JIS NCF 825 Buttweld Tee, ASTM B366 Alloy 825 Buttweld Tee Manufacturer in Mumbai India

Incoloy 825 Equal Tee

ANSI B16.9 Incoloy 825 Buttweld Cross, N08825 Buttweld Equal Cross Supplier, JIS NCF 825 Buttweld Cross, ASTM B366 Alloy 825 Buttweld Cross Manufacturer in Mumbai India

Incoloy 825 Equal Cross

ANSI B16.9 Incoloy 825 Buttweld Reducer, ANSI B16.9 JIS NCF 825 Reducer, JIS NCF 825 Buttweld Reducer, N08825 Buttweld Reducer Supplier, 2.4816 Buttweld Reducer, ASTM B366 Alloy 825 Buttweld Reducer Manufacturer in Mumbai India

825 Incoloy Reducer

ANSI B16.9 Incoloy 825 Buttweld Stub End, 2.4816 Long Stub End, N08825 Buttweld Stub End Supplier, JIS NCF 825 Buttweld Stub End, ASTM B366 Alloy 825 Shot Stub End Manufacturer in Mumbai India

Incoloy 825 Stub End

ANSI B16.9 Incoloy 825 Buttweld Bend, N08825 Buttweld Long Radius Bend Supplier, JIS NCF 825 Buttweld Bends, ASTM B366 Alloy 825 Piggable Bend Manufacturer in Mumbai India

Incoloy 825 Pipe Bend

ANSI B16.9 Incoloy 825 End Caps, 825 Incoloy End Cap, Incoloy UNS N08825 End Cap, Incoloy WERKSTOFF NR. 2.4858 End Cap, ASTM B366 825 Incoloy End Cap Supplier in Mumbai, India

Incoloy Alloy 825 End Cap

ANSI B16.9 Incoloy 825 Pipe Fittings, 825 Incoloy Buttweld Fitting, Incoloy UNS N08825 Buttweld Fitting, ASTM B366 825 Incoloy Buttweld Fitting Supplier in Mumbai, India

Incoloy 825 Pipe Fittings

Incoloy 825 Buttweld Pipe Fittings Dimensions

Why Purchase From Unichem Steel & Alloy Pvt. Ltd.

  • Unichem Steel & Alloy Pvt. Ltd. strive for quality production of Incoloy 825 Equal Tee. We adequately test raw materials and confirm to ASTM, ASME, DIN, EN, JIS Standards to make the highest quality Incoloy 2.4816 Buttweld Elbow. Alloy 825 Reducer are provided with 100% Radiography Test Report and Third Party Inspection or Buyer Inspection service is available on finished products.
  • Value Added Services are provided such as Epoxy & FBE coating, Sandblasting, Hot dipped galvanizing, Electropolish or other special finishes, Threading, soldering, Custom shape cutting, fabrication services on ASTM B366 Incoloy 825 Buttweld Pipe Fittings.
  • Unichem Steel & Alloy Pvt. Ltd. is an expert in manufacturing of custom size Incoloy 825 Buttweld Fittings with accurate dimensions and uniform wall thickness.
  • Call us for free sample & Price List of ANSI B16.9 Incoloy 825 Butt weld Fittings from ½” NB to 48” NB in Sch 10s, 40s, 80s, 160s, XXS In order to meet the off-hand requirement of our clients.
  • We are presently equipped with modern manufacturing equipment and inspection tools such as Lathe Machines, Milling Machine, Heating & Annealing Furnaces, forging and deep drawing presses, machining, finishing, and testing facilities. In order to maintain reliability and quality of our Incoloy 825 45 Degree Elbow, and 90 Degree Elbows and Pipe Bends.
  • Supplier and exporter of Incoloy 825 Pipe Fittings (Buttweld Elbow, Tee, Reducers, Cross, Bends, End Caps, Stub End, Nipple, Collar, etc) are packaged to ensure that there is no damage during transit. In the case of exports, products are packed in wooden cases. All Nickel Alloy 825 Seamless Pipe Fittings are marked with Size, Lot No, Grade, Degree, and our trademark. On special requests we make custom marking on pipe fittings.

In Stock Incoloy Alloy 825 Butt weld Pipe Fittings

Incoloy WERKSTOFF NR. 2.4858 Cross Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

Alloy 825 Short Radius Elbow Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.05 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

ASME SB366 Incoloy 825 Long Stub Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Size Chart of Incoloy 825 Pipe Fittings in India

Forms of Pipe Fttings Size Range Dimension Standards Schedules of Buttweld fittings
Seamless Pipe Fittings Welded Pipe Fittings
Incoloy Return Bends 1/8” NB to 8" NB ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MS SP 75 SCH 5, SCH 5S, SCH 10, SCH 10S, SCH 20, SCH 30, SCH 40S, SCH 40, SCH STD, SCH 60, SCH 80s, SCH 100, SCH 120, SCH XS, SCH XXS, SCH 160, upto 50mm in case of Welded Fittings
Incoloy Tees 1/8” NB to 24" NB Upto 42" NB
Incoloy Reducers 1/8” NB to 24" NB Upto 42" NB
Incoloy End Caps 1/8” NB to 24" NB Upto 42" NB
Incoloy Swage Nipple 2 1/16” to 30”
Incoloy Elbows — 45, 90 & 180 Degree 1/8” NB to 24" NB Upto 42" NB
Incoloy Cross 1/8” NB to 8" NB

ASTM B366 UNS N08825 Tee Weight Chart

Nominal Pipe Size Outside diameterat bevel Center-to-End
Run (C) Outlet(M)
1/2″ 21.3 25 25
3/4″ 26.7 29 29
1″ 33.4 38 38
1 1/4″ 42.2 48 48
1 1/2″ 48.3 57 57
2″ 60.3 64 64
2 1/2″ 73.0 76 76
3″ 88.9 86 86
3 1/2″ 101.6 95 95
4″ 114.3 105 105
5″ 141.3 124 124
6″ 168.3 143 143
8″ 219.1 178 178
10″ 273.0 216 216
12″ 323.8 254 254
14″ 355.6 279 279
16″ 406.4 305 305
18″ 457.0 343 343
20″ 508.0 381 381
22″ 559.0 419 419
24″ 610.0 432 432

Incoloy 825 Buttweld Pipe Fittings Manufacturing Standards

American Steel Pipe Fittings Standard
Standard Code Standard Name
ANSI ASME B16.28 Wrought steel butt-welding short radius elbows and returns
MSS SP-43 Wrought Incoloy butt-welding fittings
ANSI ASME B16.9 Factory-Made wrought steel pipe fittings
MSS SP-75 Forging butt-welding fittings
ANSI ASME SA-366 Forged Durimet pipe fittings
ISO 5251 Incoloy butt-welding fittings
German Steel Pipe Fittings Standard
DIN 2617 Steel butt-welding pipe fittings.caps
DIN 2616 Steel butt-welding pipe fittings.reducers
DIN 2615 Steel butt-welding pipe fittings.tees
DIN 2605 Steel butt-welding pipe fittings.elbows and bends
Japanese Steel Pipe Fittings Standard
JIS B2313 Steel plate butt-welding pipe fittings
JIS B2312 Steel butt-welding pipe fittings
JIS B2311 Universal steel butt-welding pipe fittings
Other Steel Pipe Fittings Standard
EN 1025 3 Butt-welding pipe fittings

Incoloy N08825 Buttweld Fittings Applications and Uses

  • Power Plant / Power Generation
  • Fertilizers
  • Oil & Gas
  • Refineries
  • Chemical Industry
  • Pulp and Paper Industry
  • Petrochemicals
  • Engineering Project
  • Environmental and Water Projects
  • Boiler Manufacturers
  • Pumps and Valves
  • Cement Industries
  • Aerospace Industry
  • Nuclear Industry
  • Construction
  • Ship Building Companies
  • Thermal Processing
  • Pharma Industry
  • Off-Shore Oil Drilling Companies

Ready Stock of Incoloy 825 Pipe Fittings in India

Incoloy 825 90° LR Elbow 825 Incoloy Seamless Pipe Fittings
Incoloy 825 90° Weldable SR Elbow Alloy UNS N08825 Pipe Reducers
ASME B16.9 Incoloy 825 90° Reducing Elbow 825 Nickel Alloy Welded Pipe Fittings
MSS SP-43 Incoloy 825 Stub End ASTM B366 825 Incoloy Caps
Incoloy NA 16 Pipe Fittings B366 825 Two Joint Pipe Fittings
ASTM B366 Incoloy 825 Reducing Tee ASTM B366 825 Lateral Tee
Sch 10 Incoloy 825 Concentric Reducer Incoloy® Alloy 825 Welded Pipe Fittings
Sch 80 Nickel Alloy 825 Eccentric Reducer B366 Grade 825 Industrial Buttweld Pipe Fittings
ANSI B16.9 Incoloy 825 Pipe Cap UNS N08825 Incoloy Weldable 3D Elbow
825 Incoloy 180° Buttweld Elbow Alloy 825 Lap Joint Stub Ends Stockists
ASTM B366 Gr 825 45° Long Radius Elbow 2.4858 Incoloy Alloy Short Radius Elbow
B366 Grade 825 Pipe Bends ASTM B366 825 Incoloy Buttweld Pipe Fittings
825 Incoloy 180° LR Return Bend 825 Incoloy® Alloy Seamless Reducing Tee
825 Nickel Alloy Seamless Fittings Incoloy 825 1D Elbow/3D Elbow/5D Elbow
Incoloy 825 Weldable 1.5D Elbow 825 Incoloy Alloy Two Halve Butt weld Fittings
Incoloy 2.4858 Stub End 1 Inch Incoloy 825 Buttweld Pipe Fittings
6 Inch Incoloy Alloy 825 Buttweld Pipe Fittings 825 Incoloy Buttweld Reducing Nipple
Incoloy Alloy 825 Seamless Buttweld Fittings Sch 80 Incoloy 825 Pipe Fittings
ASTM B366 Incoloy 825 Eccentric Reducer ASME B16.9 Incoloy NiCr21Mo 10D Elbow
NiCr21Mo Incoloy® Alloy Two Joint Pipe Fittings 825 Incoloy LR Elbow
Alloy 825 Wrought Austenitic 45 Degree Elbow ASTM B366 825 Welded Pipe Fittings
NiCr21Mo Incoloy Alloy 90° Seamless Elbow Incoloy 825 Pipe Fittings
Incoloy 825 Pipe Fittings Alloy 825 Butt weld Pipe Fittings
Incoloy 2.4858 Pipe Fittings Incoloy NA 16 Buttweld Reducing Nipple
Wrought Austenitic Incoloy 825 Pipe Fittings ASTM B366 825 Eccentric Reducer
Alloy NiCr21Mo Equal Cross 825 Nickel Alloy End Pipe Cap

Nickel Alloy 825 Pipe Fittings Exporter

EUROPE: Albania, Austria, Belgium, Croatia, Czech Republic, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Malta, Netherlands, Norway, Portugal, Russia, Slovakia, Slovenia, Spain, Switzerland, UK, Ukraine.
ASIA: Bangladesh, Cambodia, India, Indonesia, Japan, Malaysia, Maldives, Myanmar, Singapore, South Korea, Sri Lanka, Taiwan, Thailand, Vietnam.
AFRICA: Algeria, Angola, Egypt, Equatorial Guinea, Gabon, Libya, Nigeria, South Africa, Sudan, The Republic Of Congo.
MIDDLE EAST: Bahrain, Cyprus, Iran, Iraq, Jordan, Kuwait, Oman, Qatar, Saudi Arabia (KSA), Syria, Turkey, United Arab Emirates (UAE), Yemen.
NORTH AMERICA: Bahamas, Canada, Costa Rica, Denmark, Jamaica, Mexico, Panama, Puerto Rico, Trinidad And Tobago, USA.
SOUTH AMERICA: Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Venezuela.

ASTM B366 825 Buttweld Fittings Supplier

Aberdeen, Abu Dhabi, Ahmedabad, Ahvaz, Al Jubail, Al Khobar, Algiers, Ankara, Atyrau, Bangkok, Bengaluru, Bhopal, Bogota, Brisbane, Busan, Cairo, Calgary, Caracas, Chandigarh, Chennai, Chiyoda, Coimbatore, Colombo, Courbevoie, Dallas, Dammam, Doha, Dubai, Edmonton, Ernakulam, Faridabad, Geoje-si, Gimhae-si, Granada, Gurgaon, Hanoi, Haryana, Ho Chi Minh City, Hong Kong, Houston, Howrah, Hyderabad, Indore, Istanbul, Jakarta, Jeddah, Karachi, Kolkata, Kuala Lumpur, Kuwait City, La Victoria, Lagos, Lahore, London, Los Angeles, Ludhiana, Madrid, Manama, Melbourne, Mexico City, Milan, Montreal, Moscow, Mumbai, Muscat, Navi Mumbai, New Delhi, New York, Noida, Perth, Petaling Jaya, Pimpri-Chinchwad, Port-of-Spain, Pune, Rajkot, Rio de Janeiro, Riyadh, Santiago, Secunderabad, Seoul, Sharjah, Singapore, Surat, Sydney, Tehran, Thane, Thiruvananthapuram, Toronto, Ulsan, Vadodara, Visakhapatnam, Vung Tau.

Contact us to get a quick quote for Grade 825 Incoloy Alloy Butt weld Pipe Fittings.

WE ARE OFFERING INCOLOY ALLOY 825 BUTTWELD PIPE BEND AS PER ISO, DIN, JIS OR ANSI STANDARD.

Request a Quote —>

Exit mobile version