ANSI B16.5 / ASME B16.47 Raised Face Flange Supplier, Manufacturer in India
Unichem Steel & Alloy Pvt. Ltd. is the most noteworthy Manufacturer, Supplier, and Exporter of Raised Face Flange in India. The Raised Face Flange is that the most common type utilized in process plant applications and is simple to identify. it’s mentioned as a Raised Face Flange because the gasket surfaces are raised above the bolting circle face. This face type allows the utilization of a good combination of gasket designs, including flat ring sheet types and metallic composites like a spiral wound and double jacketed types. Raised Face Flanges (RF flanges) are widely used for oil & gas pipelines and are easy to recognize because the gasket surface is found above the bolting line of the flange. RF Face Flanges are compatible with a good range of gaskets, from the flat cut types to the metallic and semi-metallic sorts of jacketed gaskets and spiral wound gaskets. the most goal of Raised Face Flanges is to concentrate the contact pressure on a little area of the flange thus increasing the strength of the seal. the height of the raised surface depends on the rating of the flange and is defined by ASME B16.5 (for pressure classes 150 and 300, the height of raised face shall be approx. 1.6 mm, while, for classes from 400 to 2500, The Raised Face Flange height shall be approximately 6.4 mm (1/4 inch). the foremost common Flange Face finish for ASME B16.5 RF Flanges is 125 to 250 micron Ra (3 to six micron Ra). A Raised Face Flange (RF) is simple to recognize because the gasket area is positioned above the bolting line of the flange. A Raised Face Flange is compatible with a good range of flange gaskets, starting from flat to semi-metallic and metallic types, either ring or full face. Raised Face Flanges are the foremost sold sort of flange, at least for petrochemical applications.
Largest Stockist of ANSI B16.5 / ASME B16.47 Raised Face Flanges, Raised Face Forged Flange, DIN Raised Face Flange, Series A & B Raised Face Flanges, MSS Raised Face Flange, BS10 Raised Face Flange, AWWA Raised Face Flange, ISO Raised Face Flange, UNI Raised Face Flange, API Raised Face Flange, GOST Standard Raised Face Flange in Mumbai.
- ANSI/ASME B16.5 Raised Face Flange Specifications
- ANSI/ASME B16.5 Raised Face Flange Dimensions
- Why Purchase From Unichem Steel & Alloy Pvt. Ltd.
- ASME B16.5 Raised Face Flange Weight in inch
- ANSI/ASME B16.5 Raised Face Flange Material & Grades
- Raised Face Flange Pressure Chart
- ANSI/ASME B16.5 Raised Face Flange Manufacturing Standards
Most Trusted Exporters of ANSI/ASME B16.5, ANSI/ASME B16.47 Raised Face Flanges in South Africa, Saudi Arabia, Spain, Kuwait, Singapore, Malaysia, UAE, Italy, Nigeria, Iraq, Thailand, Turkey, Vietnam, Oman, Qatar, Myanmar, Sri Lanka.
ASME B16.5 Raised Face Flange Specifications
Specifications
ASTM A182, A 240, A105, A350, A694, A516 / ASME SA182, SB240, SA 105, SA350, SA694
Standards / Dimensions
ANSI B16.47, MSS SP44, ANSI B16.5, Series A & B, ASA, API-605, AWWA, B16.48, BS 10, BS4504, EN-1092, DIN.
Size & Thickness
½” (15 NB) to 48″ (1200NB)
Pressure Class
PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Class
150#, 300#, 400#, 600#, 900#, 1500#, 2500#.
Forms
Raised Face
Flange Face Type
Flat Face (FF), Raise Face (RF), Ring Joint (RJT)
Connection Type
Ring Type Joint, Lap-Joint Face, Raised Face, Flat Face, Large Male-Female, Small Male-Female, Large Tongue & Groove, Small Tongue & Groove
ANSI B16.5 / ASME B16.47 Raised Face Flange Dimensions
| ANSI |
NOMINAL |
OD | OD | THICK. | DIAM. | DIAM. | NO. | DIAM. |
|---|---|---|---|---|---|---|---|---|
| DIAM. | DIAM. OF | OF FLANGES | OF BOLT | OF BOLT | ||||
| CLASS | NPS | OF BOLTS | OF BOLTS | |||||
| OF FLANGES | RAISED FACE | tf | CIRCLE | HOLES | ||||
| 3/4 | 3.88 | 1.69 | 0.44 | 2.75 | 0.62 | 4 | 0.50 | |
| 1 | 4.25 | 2.00 | 0.50 | 3.12 | 0.62 | 4 | 0.50 | |
| 1 1/2 | 5.00 | 2.88 | 0.62 | 3.88 | 0.62 | 4 | 0.50 | |
| 2 | 6.00 | 3.62 | 0.69 | 4.75 | 0.75 | 4 | 0.62 | |
| 3 | 7.50 | 5.00 | 0.88 | 6.00 | 0.75 | 4 | 0.62 | |
| 4 | 9.99 | 6.19 | 0.88 | 7.50 | 0.75 | 8 | 0.62 | |
| 150 | 6 | 11.00 | 8.50 | 0.94 | 9.50 | 0.88 | 8 | 0.75 |
| 8 | 13.50 | 10.62 | 1.06 | 11.75 | 0.88 | 8 | 0.75 | |
| 10 | 16.00 | 12.75 | 1.12 | 14.25 | 1.00 | 12 | 0.87 | |
| 12 | 19.00 | 15.00 | 1.19 | 17.00 | 1.00 | 12 | 0.87 | |
| 14 | 21.00 | 16.25 | 1.31 | 18.75 | 1.12 | 12 | 1.00 | |
| 16 | 23.50 | 18.50 | 1.38 | 21.25 | 1.12 | 16 | 1.00 | |
| 18 | 25.00 | 21.00 | 1.50 | 22.75 | 1.25 | 16 | 1.12 | |
| 20 | 27.50 | 23.99 | 1.62 | 25.00 | 1.25 | 20 | 1.12 | |
| 24 | 32.00 | 27.25 | 1.82 | 29.50 | 1.38 | 20 | 1.25 | |
| 3/4 | 4.62 | 1.69 | 0.56 | 3.25 | 0.75 | 4 | 0.62 | |
| 1 | 4.88 | 2.00 | 0.62 | 3.50 | 0.75 | 4 | 0.62 | |
| 1 1/2 | 6.12 | 2.88 | 0.75 | 4.25 | 0.88 | 4 | 0.75 | |
| 2 | 6.50 | 3.62 | 0.81 | 5.00 | 0.75 | 8 | 0.62 | |
| 3 | 8.25 | 5.00 | 1.06 | 6.62 | 0.88 | 8 | 0.75 | |
| 4 | 10.00 | 6.19 | 1.19 | 7.88 | 0.88 | 8 | 0.75 | |
| 300 | 6 | 12.50 | 8.50 | 1.38 | 10.62 | 0.88 | 12 | 0.75 |
| 8 | 15.00 | 10.62 | 1.56 | 13.00 | 1.00 | 12 | 0.87 | |
| 10 | 17.50 | 12.75 | 1.82 | 15.25 | 1.12 | 16 | 1.00 | |
| 12 | 20.50 | 15.00 | 1.94 | 17.75 | 1.25 | 16 | 1.12 | |
| 14 | 23.00 | 16.25 | 2.06 | 20.25 | 1.25 | 20 | 1.12 | |
| 16 | 25.50 | 18.50 | 2.19 | 22.50 | 1.38 | 20 | 1.25 | |
| 18 | 28.00 | 21.00 | 2.31 | 24.75 | 1.38 | 24 | 1.25 | |
| 20 | 30.50 | 23.00 | 2.44 | 27.00 | 1.38 | 24 | 1.25 | |
| 1 | 4.88 | 2.00 | 0.69 | 3.50 | 0.75 | 4 | 0.62 | |
| 1 1/2 | 6.12 | 2.88 | 0.88 | 4.50 | 0.88 | 4 | 0.75 | |
| 2 | 6.50 | 3.62 | 1.00 | 5.00 | 0.75 | 8 | 0.62 | |
| 3 | 8.25 | 5.00 | 1.25 | 6.62 | 0.88 | 8 | 0.75 | |
| 4 | 10.75 | 6.19 | 1.50 | 8.50 | 1.00 | 8 | 0.87 | |
| 600 | 6 | 14.00 | 8.50 | 1.88 | 11.50 | 1.12 | 12 | 1.00 |
| 8 | 16.50 | 10.62 | 2.19 | 13.75 | 1.25 | 12 | 1.12 | |
| 10 | 20.00 | 12.75 | 2.50 | 17.00 | 1.38 | 16 | 1.25 | |
| 12 | 22.00 | 15.00 | 2.62 | 19.25 | 1.38 | 20 | 1.25 | |
| 14 | 23.75 | 16.25 | 2.75 | 20.75 | 1.50 | 20 | 1.37 | |
| 16 | 27.00 | 18.50 | 3.00 | 23.75 | 1.62 | 20 | 1.50 | |
| 1 1/2 | 7.00 | 2.88 | 1.25 | 4.88 | 1.12 | 4 | 1.00 | |
| 2 | 8.50 | 3.62 | 1.50 | 6.50 | 1.00 | 8 | 0.87 | |
| 3 | 9.50 | 5.00 | 1.50 | 7.50 | 1.00 | 8 | 0.87 | |
| 900 | 4 | 11.50 | 6.19 | 1.75 | 9.25 | 1.25 | 8 | 1.12 |
| 6 | 15.00 | 8.50 | 2.19 | 12.50 | 1.25 | 12 | 1.12 | |
| 8 | 18.50 | 10.62 | 2.50 | 15.50 | 1.50 | 12 | 1.37 | |
| 10 | 21.50 | 12.75 | 2.75 | 18.50 | 1.50 | 16 | 1.37 | |
| 1 1/2 | 7.00 | 2.88 | 1.25 | 4.88 | 1.12 | 4 | 1.00 | |
| 2 | 8.50 | 3.62 | 1.50 | 6.50 | 1.00 | 8 | 0.87 | |
| 1500 | 3 | 10.50 | 5.00 | 1.88 | 8.00 | 1.25 | 8 | 1.12 |
| 4 | 12.25 | 6.19 | 2.12 | 9.50 | 1.38 | 8 | 1.25 | |
| 6 | 15.50 | 8.50 | 3.25 | 12.50 | 1.50 | 12 | 1.37 | |
| 8 | 19.00 | 10.62 | 3.62 | 15.50 | 1.75 | 12 | 1.62 |
Why Purchase From Unichem Steel & Alloy Pvt. Ltd.
- Unichem Steel & Alloy Pvt. Ltd. strive for quality production of ANSI/ASME B16.5 Raised Face Flanges. We adequately test raw materials and confirm to ASTM, ASME, DIN, EN, JIS Standards to make the highest quality Raised Face Flanges. Raised Face Flanges is provided with 100% Radiography Test Report and Third Party Inspection or Buyer Inspection service is available on finished products.
- Value Added Services are provided such as Epoxy & FBE coating, Sandblasting, Hot dipped galvanizing, Electropolish or other special finishes, Threading, soldering, Custom shape cutting, fabrication services on ANSI 16.47 Raised Face Flanges.
- Unichem Steel & Alloy Pvt. Ltd. is an expert in manufacturing custom size ANSI/ASME B16.47 Raised Face Flanges with accurate dimensions and uniform wall thickness.
- We are presently equipped with modern manufacturing equipment and inspection tools such as Lathe Machines, Milling Machine, Heating & Annealing Furnaces, forging and deep drawing presses, machining, finishing, and testing facilities. In order to maintain reliability and quality of our EN 1092-1 Raised Face Flange, MSS SP-44 Raised Face Flanges, ISO Standard Raised Face Flanges.
- As leading exporters and suppliers we keep a buffer stock of ASME B16.5 Raised Face Flanges in all grades from ½” NB to 48” NB in Sch 10s, the 40s, 80s, 160s, XXS In order to meet the off-hand requirement of our clients.
- ANSI/ASME B16.5 Flanges, ANSI/ASME B16.47 Raised Face Flanges are packaged to ensure that there is no damage during transit. In the case of exports, products are packed in wooden cases. All Raised Face Pipe Flanges are marked with Size, Lot No, Grade, Degree, and our trademark. On special requests we make custom marking on Raised Face Flanges.
- Test Certificates: Raw Materials Certificate, Manufacturer Test Certificate as per EN 1092 / 3.1B, Third Party Inspection Report, 100% Radiography Test Report.
- No minimum quantity order limit. Get Market leading prices on all types of Industrial Raised Face Flanges in India.
ASME B16.5 Raised Face Flange Weight in inch
| NPS | O D |
Sch 10 |
Sch 20 |
Sch 30 |
Sth. Wall |
Sch 40 |
Sch 60 |
Extra Strong |
Sch 80 |
Sch 100 |
Sch 120 |
Sch 140 |
Sch 160 |
Double Extra Strong |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1” | 1.315 | 1.097 | 1.049 | 1.049 | 0.957 | 0.957 | 0.815 | 0.599 | ||||||
| 1/2” | 0.840 | 0.674 | 0.622 | 0.622 | 0.546 | 0.546 | 0.464 | 0.252 | ||||||
| 3/4” | 1.050 | 0.884 | 0.824 | 0.824 | 0.742 | 0.742 | 0.612 | 0.434 | ||||||
| 1.1/4” | 1.660 | 1.442 | 1.380 | 1.380 | 1.278 | 1.278 | 1.160 | 0.896 | ||||||
| 1.1/2” | 1.900 | 1.682 | 1.610 | 1.610 | 1.500 | 1.500 | 1.338 | 1.100 | ||||||
| 2” | 2.375 | 2.157 | 2.067 | 2.067 | 1.939 | 1.939 | 1.687 | 1.503 | ||||||
| 2.1/2” | 2.875 | 2.635 | 2.469 | 2.469 | 2.323 | 2.323 | 2.125 | 1.771 | ||||||
| 3” | 3.500 | 3.260 | 3.068 | 3.068 | 2.900 | 2.900 | 2.624 | 2.300 | ||||||
| 3-1/2” | 4.000 | 3.760 | 3.548 | 3.548 | 3.364 | 3.364 | 2.728 | |||||||
| 4” | 4.500 | 4.260 | 4.026 | 4.026 | 3.826 | 3.826 | 3.624 | 3.438 | 3.152 | |||||
| 5” | 5.563 | 5.295 | 5.047 | 5.047 | 4.813 | 4.813 | 4.563 | 4.313 | 4.063 | |||||
| 6” | 6.625 | 6.357 | 6.065 | 6.065 | 5.761 | 5.761 | 5.501 | 5.187 | 4.897 | |||||
| 8” | 8.625 | 8.329 | 8.125 | 8.071 | 7.981 | 7.981 | 7.813 | 7.625 | 7.625 | 7.437 | 7.187 | 7.001 | 6.813 | 6.875 |
| 10” | 10.750 | 10.420 | 10.250 | 10.136 | 10.020 | 10.020 | 9.750 | 9.750 | 9.562 | 9.312 | 9.062 | 8.750 | 8.500 | 8.750 |
| 12” | 12.750 | 12.390 | 12.250 | 12.090 | 12.000 | 11.938 | 11.626 | 11.750 | 11.374 | 11.062 | 10.750 | 10.500 | 10.126 | 10.750 |
| 14” | 14.000 | 13.500 | 13.376 | 13.250 | 13.250 | 13.124 | 12.812 | 13.000 | 12.500 | 12.124 | 11.814 | 11.500 | 11.188 | |
| 16” | 16.000 | 15.500 | 15.376 | 15.250 | 15.250 | 15.000 | 14.688 | 15.000 | 14.312 | 13.938 | 13.564 | 13.124 | 12.812 | |
| 18” | 18.000 | 17.500 | 17.376 | 17.124 | 17.250 | 16.876 | 16.500 | 17.000 | 16.124 | 15.688 | 15.250 | 14.876 | 14.438 | |
| 20” | 20.000 | 19.500 | 19.250 | 19.000 | 19.250 | 18.812 | 18.376 | 19.000 | 17.938 | 17.438 | 17.000 | 16.500 | 16.062 | |
| 24” | 24.000 | 23.500 | 23.250 | 22.876 | 23.250 | 22.624 | 22.062 | 23.000 | 21.562 | 20.938 | 20.376 | 19.876 | 19.312 | |
| 30” | 30.000 | 29.376 | 29.000 | 28.750 | 29.250 | 29.000 | ||||||||
| 36” | 36.000 | 35.376 | 35.000 | 34.750 | 35.250 | 34.500 | 35.000 | |||||||
| 42” | 42.000 | 41.250 | 41.000 |
ASME B16.5 Raised Face Flanges Material & Grades
| Stainless Steel Raised Face Flange |
|---|
| ASTM / ASME A/SA 182: F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. |
| Carbon Steel Raised Face Flange |
| ASTM A105/A694/ A350 LF3/A350 LF2: F42, F46, F52, F56, F60, F65, F70 |
| Alloy Steel Raised Face Flange |
| ASTM A182: F1, F5, F9, F11, F22, F91 |
| Duplex & Super Duplex Steel Raised Face Flange |
| ASTM / ASME A/SA 182: F44, F45, F51, F53, F55, F60, F61. |
| Nickel Alloy Raised Face Flange |
| ASTM / ASME SB 564 / 160 / 472: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3) |
Raised Face Flange Pressure Chart
| Temperature (F°) | 150# | 300# | 400# | 600# | 900# | 1500# | 2500# |
|---|---|---|---|---|---|---|---|
| -20 to 100 | 285 | 740 | 985 | 1480 | 2220 | 3705 | 6170 |
| 200 | 260 | 680 | 905 | 1360 | 2035 | 3395 | 5655 |
| 300 | 230 | 655 | 870 | 1310 | 1965 | 3270 | 5450 |
| 400 | 200 | 635 | 845 | 1265 | 1900 | 3170 | 5280 |
| 500 | 170 | 605 | 805 | 1205 | 1810 | 3015 | 5025 |
| 600 | 140 | 570 | 755 | 1135 | 1705 | 2840 | 4730 |
| 650 | 125 | 550 | 730 | 1100 | 1650 | 2745 | 4575 |
| 700 | 110 | 530 | 710 | 1060 | 1590 | 2655 | 4425 |
| 750 | 95 | 505 | 675 | 1015 | 1520 | 2535 | 4230 |
| 800 | 80 | 410 | 550 | 825 | 1235 | 2055 | 3430 |
| 850 | 65 | 320 | 425 | 640 | 955 | 1595 | 2655 |
| 900 | 50 | 230 | 305 | 460 | 690 | 1150 | 1915 |
| 950 | 35 | 135 | 185 | 275 | 410 | 685 | 1145 |
| 1000 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
ASME B16.5 Raised Face Flanges Manufacturing Standards
| ASME Standard | ANSI B16.5, ANSI B16.47, ANSI B16.36, ANSI B16.48, BS 4504, UNI 2277/2278,, JIS, SABS1123, GOST-12820 |
|---|---|
| DIN Standard | DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673 |
| EN Standard | EN1092 |
| ASTM A182 – ASME SA182 | Standard Specification for Wrought Austenitic SS Pipe Flanges |
| MSS SP-44 | Pipe Flange |
Raised Face Flanges Type, Size, and Pressure Class
| Specification | Pressure Class | Size Range |
|---|---|---|
| ASME/ANSI B16.5 | 150 to 2500LBS 150 to 1500LBS |
26“ to 60″ 26“ to 48″ |
| ASME/ANSI B16.36 | 300 To 2500LBS | 1″ to 12″ |
| ASME/ANSI B16.47 | 75 to 300LBS 400, 600LBS 900LBS |
1/2“ to 12″ 26“ to 60″ 26“ to 48″ |
| BS 10 | TABLE-A, D, E, F, H, J, K, R, S, T | 15mm to 600mm |
| EN 1092-1 / DIN / BS 4504 Flanges | PN2.5 to PN16 PN25 PN40 PN63 PN100 PN160, PN250 PN320 PN400 |
10mm to 1800mm 10mm to 1000mm 10mm to 600mm 10mm to 400mm 10mm to 350mm 10mm to 300mm 10mm to 250mm 10mm to 200mm |
Ready Stock of ASME B16.47 Raised Face Flanges in India
| Raised Face Flange | Raised Face Steel Flanges |
| ANSI B16.5 Raised Face Flanges | Raised Face Flange Dimensions |
| ASME B16.5 Raised Face Flanges | ANSI B16.5 Class 150 Raised Face Flanges |
| Stainless Steel Raised Face Flanges | SS Raised Face Flange |
| Raised Face Flanges Dealer | ASME B16.47 Series A and B Raised Face Flanges |
| ANSI B16.5 class 150 Raised Face Flange | ANSI 150 Raised Face Flange |
| Carbon Steel Raised Face Flange | High Quality Raised Face Flanges |
| ASTM A182 Stainless Steel Raised Face Flange | Duplex Steel Raised Face Flange |
| Super Duplex Steel Raised Face Flange | Copper Nickel Raised Face Pipe Flanges |
| High Nickel Alloy Raised Face Flanges | Hastelloy Raised Face Flanges |
| Titanium ASME B16.47 Series A and B Raised Face Flanges | Inconel Raised Face Flanges |
ANSI B16.5 Raised Face Flange Dimensions Tolerance
|
Outside Diameter: ≤ 24 = 1.6 mm | > 24 = ± 3.2 mm |
Inside Diameter: not applicable |
|
Diameter of Contact Face: 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised Face, Tongue & Groove / Male-Female = ± 0.4 mm |
Outside Diameter of Hub: ≤ 12 = + 2.4 mm / – 1.6 mm | ≥ 14 = ± 3.2 mm |
|
Diameter of Counterbore: not applicable |
Drilling: Bolt Circle = 1.6 mm | Bolt Hole Spacing = ± 0.8 mmEccentricity of Bolt Circle with Respect to Facing≤ 2½ = 0.8 mm max. | ≥ 3 = 1.6 mm max. |
|
Thickness: ≤ 18 = + 3.2 mm / – 0 | ≥ 20 = + 4.8 mm / – 0 |
Length thru Hub: ≤ 18 = + 3.2 mm / – 0.8 mm | ≥ 20 = + 4.8 mm / – 1.6 mm |
ASME B16.47 Raised Face Flanges Applications and Uses
- Power Plant / Power Generation
- Fertilizers
- Oil & Gas
- Refineries
- Chemical Industry
- Pulp and Paper Industry
- Petrochemicals
- Engineering Project
- Environmental and Water Projects
- Boiler Manufacturers
- Pumps and Valves
- Cement Industries
- Aerospace Industry
- Nuclear Industry
- Construction
- Ship Building Companies
- Thermal Processing
- Pharma Industry
- Off-Shore Oil Drilling Companies
ANSI/ASME B16.5 Raised Face Flange Exporter
EUROPE: Albania, Austria, Belgium, Croatia, Czech Republic, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Malta, Netherlands, Norway, Portugal, Russia, Slovakia, Slovenia, Spain, Switzerland, UK, Ukraine.
ASIA: Bangladesh, Cambodia, India, Indonesia, Japan, Malaysia, Maldives, Myanmar, Singapore, South Korea, Sri Lanka, Taiwan, Thailand, Vietnam.
AFRICA: Algeria, Angola, Egypt, Equatorial Guinea, Gabon, Libya, Nigeria, South Africa, Sudan, The Republic Of Congo.
MIDDLE EAST: Bahrain, Cyprus, Iran, Iraq, Jordan, Kuwait, Oman, Qatar, Saudi Arabia (KSA), Syria, Turkey, United Arab Emirates (UAE), Yemen.
NORTH AMERICA: Bahamas, Canada, Costa Rica, Denmark, Jamaica, Mexico, Panama, Puerto Rico, Trinidad And Tobago, USA.
SOUTH AMERICA: Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Venezuela.
ASIA: Bangladesh, Cambodia, India, Indonesia, Japan, Malaysia, Maldives, Myanmar, Singapore, South Korea, Sri Lanka, Taiwan, Thailand, Vietnam.
AFRICA: Algeria, Angola, Egypt, Equatorial Guinea, Gabon, Libya, Nigeria, South Africa, Sudan, The Republic Of Congo.
MIDDLE EAST: Bahrain, Cyprus, Iran, Iraq, Jordan, Kuwait, Oman, Qatar, Saudi Arabia (KSA), Syria, Turkey, United Arab Emirates (UAE), Yemen.
NORTH AMERICA: Bahamas, Canada, Costa Rica, Denmark, Jamaica, Mexico, Panama, Puerto Rico, Trinidad And Tobago, USA.
SOUTH AMERICA: Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Venezuela.
ANSI/ASME B16.47 Raised Face Flange Supplier
Aberdeen, Abu Dhabi, Ahmedabad, Ahvaz, Al Jubail, Al Khobar, Algiers, Ankara, Atyrau, Bangkok, Bengaluru, Bhopal, Bogota, Brisbane, Busan, Cairo, Calgary, Caracas, Chandigarh, Chennai, Chiyoda, Coimbatore, Colombo, Courbevoie, Dallas, Dammam, Doha, Dubai, Edmonton, Ernakulam, Faridabad, Geoje-si, Gimhae-si, Granada, Gurgaon, Hanoi, Haryana, Ho Chi Minh City, Hong Kong, Houston, Howrah, Hyderabad, Indore, Istanbul, Jakarta, Jeddah, Karachi, Kolkata, Kuala Lumpur, Kuwait City, La Victoria, Lagos, Lahore, London, Los Angeles, Ludhiana, Madrid, Manama, Melbourne, Mexico City, Milan, Montreal, Moscow, Mumbai, Muscat, Navi Mumbai, New Delhi, New York, Noida, Perth, Petaling Jaya, Pimpri-Chinchwad, Port-of-Spain, Pune, Rajkot, Rio de Janeiro, Riyadh, Santiago, Secunderabad, Seoul, Sharjah, Singapore, Surat, Sydney, Tehran, Thane, Thiruvananthapuram, Toronto, Ulsan, Vadodara, Visakhapatnam, Vung Tau.
Contact us to get a quick quote for ANSI B16.5 / ASME B16.47 Raised Face Flanges.